Cisco CRS-4-DC-SUPPLY CRS-1 Series DC Power Supply Unit for CRS-4 IPUPACTAAB KMJ

Description

For sale is a Cisco CRS-4-DC-SUPPLY CRS-1 Series DC Power Supply Unit for CRS-4 IPUPACTAAB KMJ
Up for sale is a Cisco CRS-4-DC-SUPPLY.
This unit is tested and in perfect working condition!
Warranty Terms:
This item comes with a 90 day warranty. If a piece of equipment is defective in any way that is not described, please message us and we will do our best to troubleshoot or replace the defective equipment. If we do not have a replacement piece in stock, we will refund the cost of the equipment.
*IOS / module revision in console below may vary on each piece unless specified above or in title*
RP/0/RP0/CPU0:ios(admin)#show platform Thu May 21 15:36:06.999 UTC Node Type PLIM State Config State ————- —————– —————- ————— ————— 0/3/SP MSC(SP) N/A IN-RESET PWR,NSHUT,MON 0/RP0/CPU0 RP(Active) N/A IOS XR RUN PWR,NSHUT,MON 0/SM0/SP FC-40G/S(SP) N/A IOS XR RUN PWR,NSHUT,MON 0/SM1/SP FC-40G/S(SP) N/A IOS XR RUN PWR,NSHUT,MON 0/SM2/SP FC-40G/S(SP) N/A IOS XR RUN PWR,NSHUT,MON 0/SM3/SP FC-40G/S(SP) N/A IOS XR RUN PWR,NSHUT,MON RP/0/RP0/CPU0:ios(admin)#show diag Thu May 21 15:36:10.119 UTC CARD 0/3/* : Unknown Card Type Data Not Available NODE 0/3/SP : Unknown Node Type Data Not Available CARD 0/RP0/* : Cisco CRS Series 8 Slots 12 GB Performance Route Processor MAIN: board type 100008 800-33495-03 rev C0 dev 122714 S/N SAD15470234 PCA: 73-13914-05 rev B0 PID: CRS-8-PRP-12G VID: V02 CLEI: IPUCA2SBAB ECI: 180480 NODE 0/RP0/CPU0 Node State : IOS XR RUN PLD: Motherboard: 0x000d, Processor: 0x0007, Power: 0x0000 MONLIB: N/A ROMMON: Version 2.05 (20110622:151317) [CRS ROMMON] MEM Size: 0 Mbytes CARD 0/SM0/* : Cisco CRS-1 Series 4 Slots Fabric Card MAIN: board type 400041 800-27867-02 rev B0 dev N/A S/N SAD134601NH PCA: 73-10727-02 rev F0 PID: CRS-4-FC VID: V02 CLEI: IPUCAH6BAB ECI: 169515 NODE 0/SM0/SP Node State : IOS XR RUN PLD: Motherboard: 0x001e, Processor: 0x0000, Power: N/A MONLIB: QNXFFS Monlib Version 3.1 ROMMON: Version 2.07(20120620:181425) [CRS ROMMON] CARD 0/SM1/* : Cisco CRS-1 Series 4 Slots Fabric Card MAIN: board type 400041 800-27867-02 rev B0 dev N/A S/N SAD134601MN PCA: 73-10727-02 rev F0 PID: CRS-4-FC VID: V02 CLEI: IPUCAH6BAB ECI: 169515 NODE 0/SM1/SP Node State : IOS XR RUN PLD: Motherboard: 0x001e, Processor: 0x0000, Power: N/A MONLIB: QNXFFS Monlib Version 3.1 ROMMON: Version 2.07(20120620:181425) [CRS ROMMON] CARD 0/SM2/* : Cisco CRS-1 Series 4 Slots Fabric Card MAIN: board type 400041 800-27867-02 rev B0 dev N/A S/N SAD134601M0 PCA: 73-10727-02 rev F0 PID: CRS-4-FC VID: V02 CLEI: IPUCAH6BAB ECI: 169515 NODE 0/SM2/SP Node State : IOS XR RUN PLD: Motherboard: 0x001e, Processor: 0x0000, Power: N/A MONLIB: QNXFFS Monlib Version 3.1 ROMMON: Version 2.07(20120620:181425) [CRS ROMMON] CARD 0/SM3/* : Cisco CRS-1 Series 4 Slots Fabric Card MAIN: board type 400041 800-27867-02 rev B0 dev N/A S/N SAD134601MY PCA: 73-10727-02 rev F0 PID: CRS-4-FC VID: V02 CLEI: IPUCAH6BAB ECI: 169515 NODE 0/SM3/SP Node State : IOS XR RUN PLD: Motherboard: 0x001e, Processor: 0x0000, Power: N/A MONLIB: QNXFFS Monlib Version 3.1 ROMMON: Version 2.07(20120620:181425) [CRS ROMMON] Rack 0 – Fan Tray 0 (Upper): Cisco CRS-1 Series Fan Tray for 4 slots LCC MAIN: board type 900166 800-27931-03 rev A0 dev N/A S/N SMA13400879 PCA: 73-10764-02 rev A0 PID: CRS-4-FAN-TR VID: V02 CLEI: IPPQAHRJAB ECI: 164769 Rack 0 – Power Shelf : Cisco CRS-1 Series DC Input Shelf for 4 Slots LCC MAIN: board type a10192 800-27960-02 rev A0 dev N/A S/N SMA13400854 PCA: 0-0-00 rev 00 PID: CRS-4-DC-INPUT VID: V02 CLEI: IPMP400ARB ECI: 454713 Rack 0 – DC PIM : MAIN: board type a10194 800-28867-02 rev A0 dev N/A S/N SMA1340086Y PCA: 0-0-00 rev 00 PID: CRS-4-DC-PIM VID: V02 CLEI: IPUPACUAAB ECI: 155389 Rack 0 – Power Supply A1 : Cisco CRS-1 Series DC Power Supply for 4 Slots LCC MAIN: board type b10182 800-28039-01 rev A0 dev N/A S/N SMA133808D2 PCA: 0-0-00 rev 00 PID: CRS-4-DC-SUPPLY VID: V01 CLEI: IPUPACTAAA ECI: 150205 Rack 0 – Power Supply B0 : Cisco CRS-1 Series DC Power Supply for 4 Slots LCC MAIN: board type b10182 800-28039-01 rev A0 dev N/A S/N SMA133808CZ PCA: 0-0-00 rev 00 PID: CRS-4-DC-SUPPLY VID: V01 CLEI: IPUPACTAAA ECI: 150205 Rack 0 – Cisco CRS Series 4 Slots Line Card Chassis MAIN: board type 0001e5 800-27957-02 rev D0 dev N/A S/N SMA1340084Q PCA: 73-10974-01 rev A0 PID: CRS-4-CH VID: V02 CLEI: IPMH100FRB ECI: 454748 RACK NUM: 0 RP/0/RP0/CPU0:ios(admin)#show env Thu May 21 15:36:31.454 UTC Temperature Information ——————————————— R/S/I Modules Inlet Exhaust Hotspot Temperature Temperature Temperature (deg C) (deg C) (deg C) 0/RP0/* host 31 31, 35 40, 38, 60, 60 cpu 31 0/SM0/* host 22, 25 27, 28 0/SM1/* host 21, 22 27, 28 0/SM2/* host 21, 24 27, 25 0/SM3/* host 20, 23 27, 27 Threshold Information ——————————————— R/S/I Modules Sensor Minor Major Critical (Lo Hi) (Lo Hi) (Lo Hi) 0/RP0/* host Inlet 0,52 -10,62 -15,72 host Exhaust0 0,52 -5,62 -10,72 host Exhaust1 0,57 -5,67 -10,77 host Hotspot1 0,69 -5,79 -10,89 host Hotspot2 0,63 -5,73 -10,83 host Hotspot3 0,89 -5,99 -10,109 host Hotspot4 0,90 -5,100 -10,110 cpu Inlet 0,52 -5,62 -10,72 0/SM0/* host Inlet0 0,46 -10,72 -15,82 host Inlet1 0,45 -10,71 -15,81 host Hotspot0 0,52 -10,78 -15,88 host Hotspot1 0,51 -10,77 -15,87 0/SM1/* host Inlet0 0,46 -10,72 -15,82 host Inlet1 0,45 -10,71 -15,81 host Hotspot0 0,52 -10,78 -15,88 host Hotspot1 0,51 -10,77 -15,87 0/SM2/* host Inlet0 0,46 -10,72 -15,82 host Inlet1 0,45 -10,71 -15,81 host Hotspot0 0,52 -10,78 -15,88 host Hotspot1 0,51 -10,77 -15,87 0/SM3/* host Inlet0 0,46 -10,72 -15,82 host Inlet1 0,45 -10,71 -15,81 host Hotspot0 0,52 -10,78 -15,88 host Hotspot1 0,51 -10,77 -15,87 Voltage Information ——————————————— Expected voltages are indicated within brackets R/S/I Modules <=1.25V <=1.5V <=1.8V <=5V Other (mv) (mv) (mv) (mv) (mv) 0/RP0/* host 2500(2500) 2500(2500) 2500(2500) 3299(3300) 900( 900) 894( 900) 1000(1000) 1500(1500) 1800(1800) 1500(1500) 3000(3000) 1099(1100) 1200(1200) 1208(1200) 1200(1200) 1250(1250) cpu 2499(2500) 749( 750) 1498(1500) 1800(1800) 915(1000) 1050(1050) 1199(1200) 1130(1200) 0/SM0/* host 2496(2500) 3327(3300) 3250(3300) 1818(1800) 11937(12000) 0/SM1/* host 2483(2500) 3313(3300) 3268(3300) 1818(1800) 11937(12000) 0/SM2/* host 2496(2500) 3327(3300) 3250(3300) 1804(1800) 11937(12000) 0/SM3/* host 2496(2500) 3327(3300) 3268(3300) 1818(1800) 12000(12000) LED Information ——————————————— 0/RP0/*: Alarm LED status says: NONE 0/RP0/*: Module (host) LED status says: OK Rack 0: Upper Fan Tray: LED status : OK 0/SM0/*: Module (host) LED status says: OK 0/SM1/*: Module (host) LED status says: OK 0/SM2/*: Module (host) LED status says: OK 0/SM3/*: Module (host) LED status says: OK Fan Information ——————————————— Fan speed (rpm): FAN1 FAN2 FAN3 FAN4 Rack 0: Upper 3985 4013 4013 4013 Power Supply Information ——————————————— Power-Supply Voltage Current DC-PEM (V) (A) 1: 54.420 2.600 2: 54.200 2.400 3: 54.367 2.600 4: 54.362 2.600 Total Current: 10.200 A Total Power : 554.267 W RP/0/RP0/CPU0:ios(admin)#show inv % Ambiguous command: “show inv” RP/0/RP0/CPU0:ios(admin)#show inventory Thu May 21 15:36:46.127 UTC NAME: “0/3/*”, DESCR: “MSC” PID: , VID: N/A, SN: NAME: “0/RP0/*”, DESCR: “Cisco CRS Series 8 Slots 12 GB Performance Route Processor” PID: CRS-8-PRP-12G , VID: V02, SN: SAD15470234 NAME: “MgmtEth0/RP0/CPU0/0”, DESCR: “RP Mgmt Port” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0”, DESCR: “CPU_PORT_0” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/1”, DESCR: “INTRA_RACK_SWITCH_PORT_0” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/2”, DESCR: “INTRA_RACK_SWITCH_PORT_1” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/3”, DESCR: “INTRA_RACK_SWITCH_PORT_2” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/4”, DESCR: “INTRA_RACK_SWITCH_PORT_3” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/5”, DESCR: “INTRA_RACK_SWITCH_PORT_4” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/6”, DESCR: “INTRA_RACK_SWITCH_PORT_5” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/7”, DESCR: “INTRA_RACK_SWITCH_PORT_6” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/8”, DESCR: “INTRA_RACK_SWITCH_PORT_7” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/9”, DESCR: “INTRA_RACK_SWITCH_PORT_8” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/10”, DESCR: “INTRA_RACK_SWITCH_PORT_9” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/11”, DESCR: “INTRA_RACK_SWITCH_PORT_10” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/12”, DESCR: “INTRA_RACK_SWITCH_PORT_11” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/13”, DESCR: “INTRA_RACK_SWITCH_PORT_12” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/14”, DESCR: “INTRA_RACK_SWITCH_PORT_13” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/15”, DESCR: “INTRA_RACK_SWITCH_PORT_14” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/16”, DESCR: “INTRA_RACK_SWITCH_PORT_15” PID: , VID: N/A, SN: NAME: “0/SM0/*”, DESCR: “Cisco CRS-1 Series 4 Slots Fabric Card” PID: CRS-4-FC , VID: V02, SN: SAD134601NH NAME: “ControlEthernet0/SM0/SP”, DESCR: “CPU_PORT_0” PID: , VID: N/A, SN: NAME: “0/SM1/*”, DESCR: “Cisco CRS-1 Series 4 Slots Fabric Card” PID: CRS-4-FC , VID: V02, SN: SAD134601MN NAME: “ControlEthernet0/SM1/SP”, DESCR: “CPU_PORT_0” PID: , VID: N/A, SN: NAME: “0/SM2/*”, DESCR: “Cisco CRS-1 Series 4 Slots Fabric Card” PID: CRS-4-FC , VID: V02, SN: SAD134601M0 NAME: “ControlEthernet0/SM2/SP”, DESCR: “CPU_PORT_0” PID: , VID: N/A, SN: NAME: “0/SM3/*”, DESCR: “Cisco CRS-1 Series 4 Slots Fabric Card” PID: CRS-4-FC , VID: V02, SN: SAD134601MY NAME: “ControlEthernet0/SM3/SP”, DESCR: “CPU_PORT_0” PID: , VID: N/A, SN: NAME: “Rack 0 – Chassis”, DESCR: “Cisco CRS Series 4 Slots Line Card Chassis” PID: CRS-4-CH , VID: V02, SN: SMA1340084Q NAME: “Rack 0 – Fan Tray Upper”, DESCR: “Cisco CRS-1 Series Fan Tray for 4 slots LCC” PID: CRS-4-FAN-TR , VID: V02, SN: SMA13400879 NAME: “Rack 0 – Power Shelf”, DESCR: “Cisco CRS-1 Series DC Input Shelf for 4 Slots LCC” PID: CRS-4-DC-INPUT , VID: V02, SN: SMA13400854 NAME: “Rack 0 – Power Supply A1”, DESCR: “Cisco CRS-1 Series DC Power Supply for 4 Slots LCC” PID: CRS-4-DC-SUPPLY , VID: V01, SN: SMA133808D2 NAME: “Rack 0 – Power Supply B0”, DESCR: “Cisco CRS-1 Series DC Power Supply for 4 Slots LCC” PID: CRS-4-DC-SUPPLY , VID: V01, SN: SMA133808CZ
Shipping Terms:
If you are an international buyer, please send us a message with your phone number as soon as possible. We need this to put on the commercial invoice for customs.
We can ship internationally but please contact me for the shipping quote if you would like a different service other than USPS. We do prefer FedEx for ALL shipments.
We are not responsible for duties and taxes. Those are to be paid by the recipient.
We will not declare a value under what is paid for the equipment.
Local pick up is available and always free.
Other Information:
Please message us if you have any questions or if you require any information that is not described here. Payment is expected within 5 days of auction close. A power cord and console cable will always be sent with the equipment unless it does not require these.
Our entire inventory is never completely listed on our store. We have equipment coming in all the time. If you need anything that is not in our store, send us a message and we will check on the availability.
We are buying equipment at all times. If you have any networking equipment collecting dust: Juniper, Cisco, Extreme, Foundry/Brocade, Nortel/Avaya, Hp/3Com, Dell, Aruba, Symmetricom, etc. Send us a message and we will see what we can do for you.
Thank you for stopping in. Take a peek at our other stores!
Click Here To Visit Dedicated Networks Inc. Juniper Store.
Click Here To Visit Dedicated Networks Inc. Cisco Store.
Click Here To Visit Dedicated Networks Inc. IT Hardware Store (Brocade, HP, Extreme, Adtran, ETC)
Steve Sobieck
Sales Assistant – Dedicated Networks Inc.
DNI's Easy 1 Year Warranty
Every sale includes
DNI's Easy 1 year Satisfaction Guarantee
.  We are dedicated to meeting and exceeding your expectations. If we haven't, please let us know. If there are any issues that cannot be resolved, you may simply return the item for a full refund
Shipping
We offer
Free shipping via UPS Ground to the Continental US.
Expedited shipping upgrades are always available. We may even be able to ship the same day we receive payment, let us know if you are in a hurry!  Local pick up is available and always free.
International buyers note:
Orders typically ship via UPS, contact us for rates and transit times if you would like a different service.
We can often ship for a lower price than is calculated in the listing.  Please contact us for your most accurate shipping quote.
We need your phone number before we can ship, as it is required for commercial invoices and customs.
We are not responsible for duties and taxes. Those are to be paid by the recipient/buyer.
We will not declare a value under what is paid for the equipment.
More Info
We have thousands of items in our inventory, many of which are not listed in our store. Please message us if you have any questions, or if you require any information that is not described here.
We buy networking equipment! We buy Juniper, Cisco, Extreme, Foundry, Brocade, Dell, 3Com and more! If you have any hardware collecting dust, get in touch with us.
Please let us know if there is anything we can do for you!