(pack) Wiper K10 ID 10mm-150mm NBR (choose dimensions)

Description

Welcome to our oil seal store. Huge amount of different dimensions and materials are on stock!! Don´t hasitate to contact us. We also have o-ring store, bearing store,chain store,
hydraulic and pneumatic seals store, belt store, etc - we can send together.
Most of oil seals are on stock, so we are usually shipping within 2 bussiness days.
Longer handling time 10-20 days occures just on sold out items.
We can also use UPS express shipping. Shipping rates are: UPS to USA
30USD,
UPS to Europe, U.K, Germany, France
20USD,
UPS to N.a S.America, Canada, Mexico, Brazil, Asia, China, Japan, Australia
50USD
K10 is a single acting double wiper ensuring that foreign particles are not introduced into the hydraulic cylinders. The lip is designed in a particular way that it reliably wipes off  the dirt but leaves a residual oil film on the rod.
PRODUCT ADVANTAGES
• Good scraping effect
• Wide range of dimensions
• No twisting in the housing
• Wiper lip reliably wipes away dirt and leaves a residual oil film on the retracting rod.
• Double lip makes additional protection to prevent the particles to enter into the cylinder
• Easy installation
APPLICATION
Construction machinery , forklift-trucks , injection moulding machines , agricultural machinery and standard cylinders.
MATERIAL
CODE
NBR
90 SHORE A
NB9001
OPERATING CONDITIONS
MEDIA
Mineral oils (DIN 51524)
HFA and HFB
HFC
TEMPERATURE
-30°C +105°C
+5°C +60°C
-30°C +60°C
SPEED
≤1.0 m/sn
≤1.0 m/sn
≤1.0 m/sn
Note: The above data are maximum values and cannot be used at the same time.
SURFACE ROUGHNESS
Ra
Rmax
Sliding Surface  Ød
≤0.3 μm
≤3.2 μm
Groove Base ØD
≤1.8 μm
≤10 μm
Groove Flanks S1
≤3 μm
≤16 μm
INSTALLATION
Generally , wiper can be easily fitted into the closed housing by deforming into a kidney shape. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the wiper must be oiled with system oil.
NOTES
K10 double wiper should be used in combination of suitable rod seals to avoid hydrodynamic pressure or pressure relieving bore between seal and wiper should be constructed to prevent the build up pressures (See section; Hydraulic Sealing Elements - Sample Designs). K10 wipers can be produced on request in FKM material for special applications that require high temperatures.